Skip to content

ATS&ACROSS 4.929 FINAL GEAR

2009/01/19

ats final gear
ats final gear
ats final gear

Prior to, a brand new USDM ITR transmission was ordered. Aside from the 4th, 5th and final gear, it is completely identical to the JDM 98-spec trans. Listed here are the gear ratios for both trans.

USDM ITR transmission gear ratio:
1st: 3.230
2nd: 2.105
3rd: 1.458
4th: 1.107
5th: 0.848
Reverse: 3.000
Final Drive: 4.400

JDM 98-spec ITR transmission gear ratio:
1st: 3.230
2nd: 2.105
3rd: 1.458
4th: 1.034
5th: 0.787
Reverse: 3.000
Final Drive: 4.785

Having the closer 4th and 5th gear was defiantly a plus, however the potential was limited by the 4.400 final gear found in the USDM trans. Solution? That was easy, we replaced it with a 4.929 final gear from ATS&ACROSS. Increased acceleration and response is noticed from this new setup.

New transmission with ATS&ACROSS 4.929 final gear @ 9000rpm:
1st: 3.230 – 63.47Km/h
2nd: 2.105 – 97.38Km/h
3rd: 1.458 – 140.61Km/h
4th: 1.107 – 185.19Km/h
5th: 0.848 – 241.74Km/h
Reverse: 3.000
Final Drive: 4.929

No comments yet

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: